高频涡流阵列探头在CFRP缺陷检测中的应用
作者:
作者单位:

1.安徽工程大学安徽省机器人产业共性技术研究中心 芜湖,241000;2.安徽工程大学人工智能学院 芜湖,241007;3.南京航空航天大学航空航天结构力学及控制国家重点实验室 南京,210016

中图分类号:

TH865;TM154.2

基金项目:

国家自然科学基金资助项目(51605229);安徽省高校自然科学研究资助项目(2023AH050926);安徽省经信委制造业重点领域揭榜挂帅资助项目(JB22031);安徽未来技术研究院企业合作资助项目(2023qyhz35)

  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [13]
  • | | | |
  • 文章评论
    摘要:

    为了实现高频印制电路板(printed circuit board,简称PCB)线圈阵列探头对碳纤维增强树脂(carbon fiber reinforced polymer,简称CFRP)复合材料缺陷的涡流检测,提出一种通过将PCB线圈连接不同电缆线以提高深层缺陷检测灵敏度的方法。首先,分析高频PCB阵列线圈的结构参数对磁感应强度和阻抗特性的影响,并确定线圈的内外径和线径尺寸等参数;其次,建立仿真模型,研究线圈的层数、线径对阻抗谐振频率的影响,并利用阻抗分析仪测量PCB线圈以及线圈连接不同类型同轴电缆接头(bayonet nut connector,简称BNC)电缆线时的阻抗。实验表明,电缆线的寄生电容与谐振频率呈负相关关系,较长的电缆线可提高对深层缺陷的检测能力;最后,建立CFRP检测实验平台,发现当高频PCB阵列线圈在连接不同BNC电缆线时,能够有效检测深层缺陷。该研究为通过调整连接PCB线圈的电阻-电感-电容分支电路参数来提高深层缺陷检测精度提供了参考。

    参考文献
    [1] 陈燕, 葛恩德, 傅玉灿, 等. 碳纤维增强树脂基复合材料制孔技术研究现状与展望[J]. 复合材料学报, 2015, 32(2): 301-316.CHEN Yan, GE Ende, FU Yucan, et al. Review and prospect of drilling technologies for carbon fiber reinforced polymer[J]. Acta Materiae Compositae Sinica, 2015, 32(2): 301-316. (in Chinese)
    [2] MIZUKAMI K, HIOKI S, MORIYAMA K, et al. Eddy-current array-probe technique for imaging near-surface and deep-lying delaminations in multidirectional carbon fiber composites[J]. Composite Structures, 2021,276: 114537.
    [3] SUN H Y, ALI R, JOHNSON M, et al. Enhanced flaw detection using an eddy current probe with a linear array of hall sensors[C]∥American Institute of Physics Conference Proceedings. [S.l.]: American Institute of Physics, 2005: 516-522.
    [4] 岳明明, 张卫民, 庞炜涵, 等. 涡流阵列检测缺陷的理论基础和仿真分析[J]. 北京理工大学学报, 2018, 38(2): 150-154.YUE Mingming, ZHANG Weimin, PANG Weihan, et al. Theoretical basis and simulation analysis of eddy current array to cracks defection[J]. Transactions of Beijing Institute of Technology, 2018, 38(2): 150-154. (in Chinese)
    [5] 杨洪斌, 仝茂峰, 吴晓龙, 等. 发电机风扇叶片的柔性阵列涡流检测[J]. 无损检测, 2020, 42(2): 42-47.YANG Hongbin, TONG Maofeng, WU Xiaolong, et al. Flexible array eddy current testing of generator fan blades[J]. Nondestructive Testing, 2020, 42(2): 42-47. (in Chinese)
    [6] 张卫民, 曾卫琴, 杨秀江, 等. 基于平面线圈阵列传感器的铝板材料裂纹电涡流检测[J]. 北京理工大学学报, 2014, 34(11): 1101-1105.ZHANG Weimin, ZENG Weiqin, YANG Xiujiang, et al. Study on aluminum specimen eddy current crack detection with planar coil array sensor[J]. Transactions of Beijing Institute of Technology, 2014, 34(11): 1101-1105. (in Chinese)
    [7] 丁天怀, 陈祥林. 电涡流传感器阵列测试技术[J]. 测试技术学报, 2006, 20(1): 1-5.DING Tianhuai, CHEN Xianglin. Measurement technology of eddy current sensor array[J]. Journal of Test and Measurement Technology, 2006, 20(1): 1-5. (in Chinese)
    [8] 曹祥玉. 微波技术与天线[M]. 西安: 西安电子科技大学出版社, 2008: 145-163.
    [9] 雷旭. UHF射频识别系统中的天线分析与设计[D]. 西安: 西安电子科技大学, 2013.
    [10] 付妍, 谭超, 肖志利, 等. 基于阻抗特性分析的电磁层析成像传感器优化[J]. 传感器与微系统, 2016, 35(3): 49-52.FU Yan, TAN Chao, XIAO Zhili, et al. Magnetic induction tomography sensor optimization based on impedance characteristics analysis[J]. Transducer and Microsystem Technologies, 2016, 35(3): 49-52. (in Chinese)
    [11] 李焕, 董和磊, 卫凯龙. 微型谐振式天线的阻抗匹配设计与优化[J]. 中北大学学报(自然科学版), 2021, 42(4): 349-354, 360.LI Huan, DONG Helei, WEI Kailong. Impedance matching design and optimization of miniature resonant antenna[J]. Journal of North University of China (Natural Science Edition), 2021, 42(4): 349-354, 360. (in Chinese)
    [12] TODOROKI A. Skin effect of alternating electric current on laminated CFRP[J]. Advanced Composite Materials, 2012, 21(5/6): 477-489.
    [13] CHENG J, WANG B, XU D, et al. Resistive loss considerations in the finite element analysis of eddy current attenuation in anisotropic conductive composites[J]. NDT & E International, 2021, 119: 102403.
    相似文献
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文
分享
文章指标
  • 点击次数:261
  • 下载次数: 169
  • HTML阅读次数: 112
  • 引用次数: 0
历史
  • 收稿日期:2023-10-12
  • 最后修改日期:2023-12-16
  • 在线发布日期: 2025-02-25
您是第4701019位访问者
振动、测试与诊断 ® 2025 版权所有
技术支持:北京勤云科技发展有限公司
请使用 Firefox、Chrome、IE10、IE11、360极速模式、搜狗极速模式、QQ极速模式等浏览器,其他浏览器不建议使用!