[1]张楠,邱燕超,张学良,闻邦椿.软式非线性同步振动沉桩系统的动力学分析[J].振动、测试与诊断,2017,37(2):320-325.

[2]韩 婷,樊建春,田春萌,刘书杰.界面因素对机械结合面超声传播的影响[J].润滑与密封,2020,45(12):1-6.

[3]装载机动臂的裂纹扩展寿命预测[J].中国工程机械学报

[4]徐进,朱旻昊,周仲荣.粘结石墨固体润滑涂层微动磨损性能研究[J].机械工程材料,2004,28(10):7-9,12.

[5]赵永翔,杨冰,张卫华.应变疲劳可靠性理论与方法的新进展[J].机械强度,2005,27(5):604-611.

[6]江志农,王隽妍,张进杰,李磊,孙旭,王瑶.往复压缩机流量调节装置不同运动规律下三维流场仿真研究[J].流体机械,2022,50(1):29-36.

[7]M. Massingham,P.E. Irving,.The effect of variable amplitude loading on stress distribution within a cylindrical contact subjected to fretting fatigue[J].Tribology International,2006,39(10):1084.

[8]I. Páczelt,Z. Mróz.On the analysis of steady-state sliding wear processes[J].Tribology International,2009,42(2):275-283.

[9]Bibiana Luccioni,Viviana C. Rougier.Shear behaviour of brick-mortar interface in CFRP retrofitted or repaired masonry[J].International Journal of Mechanical Sciences,2010,52(4):602-611.

[10]Günter Reiter,A. Levent Demirel,John Peanasky,Lenore Cai,Steve Granick.What determines static friction and controls the transition to sliding?[J].Tribology Letters,1995,1(1):1-12.

[11]霍亚光,高扬,宋绪丁,惠记庄.公路层间剪应力检测实验平台研制与应用[J].机械设计与制造,2021(3):203-205.

[12]许晓静,张雪峰,刘桂玲,程晓农.等通道转角挤压下变形体长度对应力的影响及开裂判据分析[J].机械工程学报,2008,44(1):222-226.

[13]权慧欣,于海洋,蔡振兵,朱旻昊.人体皮质骨/纯钛接触副径向微动损伤研究[J].润滑与密封,2007,32(9):45-48.

[14]L. Bohrquez,J. Domínguez.Analysis of the elastic punch-substrate contact under fretting: Monotonic and cyclic loading of the punch[J].International Journal of Mechanical Sciences,2005,47(3):388-417.

[15]Linmao Qian.Radial nanofretting behavior of four typical structural materials in MEMS under high loads[J].Tribology International,2009,42(9):1242-1249.

[16]Jie Yang,Liao-Liang Ke.Two-dimensional contact problem for a coating-graded layer-substrate structure under a rigid cylindrical punch[J].International Journal of Mechanical Sciences,2008,50(6):985-994.

[17]P.L.B. Oxley.Metallic friction under near-seizure conditions[J].Wear,1980,65(2):227-241.

[18]姜荣敏,张明,蔡佳圻.叠层橡胶金属弹簧轴向刚度特性研究[J].机械设计与制造工程,2016(6):87-90.

[19]Hamidreza Yazdani Sarvestani,Mohammadreza Yazdani Sarvestani.Interlaminar stress analysis of general composite laminates[J].International Journal of Mechanical Sciences,2011,53(11):958-967.

[20]F.Charles White,Sherif T. Noah,C.Fred Kettleborough,Richard B. Griffin.An apparatus for the study of wear under dynamic loading conditions[J].Wear,1984,97(2):179-197.